Dellorto Shop - Carburettor Shop - Ricambi Carburatori - Carburettor Spare Parts Jets and Service Kits


Find www.DellortoShop.com on FaceBook

Dellorto,  Weber, Solex, Edelbrock carburettors jets chokes parts and service kits& Dellorto,  Weber, Solex, Edelbrock carburettors jets chokes parts and service kits

Bringing you móre than 3.000 pages of carburettor fun!
DellortoShop.com, RicambiCarburatori.com and CarburettorShop.com are privately owned and operated websites.
We have no affiliation with Dellorto SpA.

NEW ARRIVAL:
Complete Set of Carburetor Mounts for Alfa Romeo Nord Engines 105 115 and 116 series
Complete Set of Carburetor Mounts for Alfa Romeo Nord Engines 105 115 and 116 series

Complete Set of Carburetor Mounts for Alfa Romeo Nord Engines 105 115 and 116 series

Feel free to visit our sister websites:
www.ClassicJack.com www.TheF1Store.com www.MaranelloMerchandise.com www.RaceWinkel.nl www.RossiMerchandise.com www.MotoMerchandiseShop.com www.Macora.com www.ExperienceLeMans.com www.Zagato-Cars.com www.RalphSchumacher.com www.FerrariStuff.com www.PiccoloWorld.com www.GeoHam.com www.Valentino-Rossi-Shop.com www.Valentino-Rossi-Shop.nl www.HouseOfTheTrident.com www.DellortoShop.com www.CarburateurWinkel.nl www.MaranelloLiterature.com www.CarburettorShop.com www.GunsonWinkel.nl www.GunsonShop.com www.TinToyShop.com www.RicambiCarburatori.com www.CarburetorCity.com www.CarburateurWinkel.be

Dellorto Shop - CarburettorShop - RicambiCarburatori - Carburettor Spare Parts Jets and Service Kits

!
Nordrubbers
Complete Set of Carburetor Mounts for Alfa Romeo Nord Engines 105 115 and 116 series

Complete Set of Carburetor Mounts for Alfa Romeo Nord Engines 105 115 and 116 series

Newly arrived Complete Set of Carburetor Mounts for Alfa Romeo Nord Engines 105 115 and 116 series

Here we have a complete set of parts required for a "Carb Mount Change" on Alfa Romeo's famous Nord engines.

Suitable for all Nord engines with 40 mm carburettors.

Suitable for the Weber DCOE 40, the Dellorto DHLA 40 and the Solex ADDHE 40 carbs.

These mounts are of the highest quality that we can source at this moment.

The difference in quality can be found in the "flatness" of both sides the flanges.

After the flanges are vulcanized together with rubber, they are planed on a lathe to create an absolutely flat surface. For this reason, the studs are included but still need to be installed.

As visible in the pictures, the set consists of 1 "double" mount and 2 "single" mounts.

Additionally, this set also comprises an inlet-manifiold-to-cylinder-head gasket, 4 manifold-to-mount gaskets and 4 mount-to-carburetor gaskets so that you have everything you need to replace you leaking mounts.

The photo will be corrected to show the correct number of gaskets included in this set.

Complete Set of Carburetor Mounts for Alfa Romeo Nord Engines 105 115 and 116 series

76227.45
(13) Pump Jet Weber DIR Carburetors

(13) Pump Jet Weber DIR Carburetors

Newly arrived Pump Jet Weber DIR Carburetors

Pump Jet for the Weber DIR series carburetors.

Only available in size 45!

Required quantity per carburettor: 1

This is item number 13 in the drawing.

 

 

 

 

(13) Pump Jet Weber DIR Carburetors

ECCDT175
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

Newly arrived Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

Service kit for the Stromberg 175 TCDT carburetor as fitted to the:

  • Mercedes Benz 200 W123

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 225
  • Aluminum Washer for Needle Valve
  • Various rubber / Viton O-Rings
  • Fiber Washer
  • Choke Pull-Down Diaphragm

Please note that the Stromberg 175 CDT was manufactured in Germany and ONLY used by Mercedes-Benz and Volvo.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

47610.078
(44) Throttle Return Spring for Weber DCNF carburetors

(44) Throttle Return Spring for Weber DCNF carburetors

Newly arrived Throttle Return Spring for Weber DCNF carburetors

This is the spring that forces the throttle back into the "closed" position on the Weber DCNF carburetors.

Required quantity per carburettor: 1

This is item number 44 in the drawing.

 

 

 

(44) Throttle Return Spring for Weber DCNF carburetors

CCRMVVDIAPHRAGM
Original Diaphragm for Motorcraft VV carburetors for Ford

Original Diaphragm for Motorcraft VV carburetors for Ford

Newly arrived Original Diaphragm for Motorcraft VV carburetors for Ford

Original main diaphragm for the Motorcraft Variable Venturi (or V.V.) carburetors as used on, amongst others, the:

  • Ford Capri
  • Ford Cortina MKII, MK II & MKIV
  • Ford Escort
  • Ford Fiesta
  • Ford Orion
  • Ford P-100 Pick-Up
  • Ford Sierra
  • Ford Taunus
  • Ford Transit

This is item H in the drawing.

Required quantity per carburettor: 1

Please note!
These are original New-Old-Stock, diaphragms.
Production of these diaphragms was stopped many years ago and the existing stocks are being depleted rapidly.
So... only available as long as the stock lasts!

Original Diaphragm for Motorcraft VV carburetors for Ford

PMS204
Rebuild Kit for Pierburg 34-34 2B5 Carburetors for Volvo 740 B23A

Rebuild Kit for Pierburg 34-34 2B5 Carburetors for Volvo 740 B23A

Newly arrived Rebuild Kit for Pierburg 34-34 2B5 Carburetors for Volvo 740 B23A

Service kit for the Pierburg 34-34 2B 5 carburetors as used, amongst others, on the:

  • Volvo 740 B23A - 2316 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets as per the photograph
  • Various rubber (Viton) o-rings as per the photograph
  • Enrichment diaphragm
  • 2 x Needle valve Type A

Please note:
The Pierburg 2B carburetor series was supplied with a variety of Needle Valves throughout its lifespan and the needle valves are NOT interchangeable!

This rebuild kit is, as standard, supplied with Needle Valves Type A, as per the below picture.This needle valve has an internal spring (hidden from the eye) and a solid brass tip. It measures 20.75 mm in overall length.

The set can also be supplied with Needle Valves Type B, also as per the below picture. This needle valve has an exposed spring, a Viton tip and measures 22.3 mm in overall length.

In order to select the correct needle valve, you need to disassemble your carburettor to check which version you require.

Once you have determined if you need Type A or Type B, you can select the right type through the drop box above.

Pierburg 2B Carburettor Needle Valves
Pierburg 2B Carburettor Needle Valves

This is a Carburetor City service kit of outstanding Italian manufacture.

Rebuild Kit for Pierburg 34-34 2B5 Carburetors for Volvo 740 B23A

KSKK0182NR
Rebuild kit for Keihin Carburetors on Kawasaki KLX650

Rebuild kit for Keihin Carburetors on Kawasaki KLX650

Newly arrived Rebuild kit for Keihin Carburetors on Kawasaki KLX650

Service Kit for the Keihin carburetors as used on the 1993 - 1994 Kawasaki KLX650 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve Needle
  • Mixture Screw Set
  • Jet Needle
  • Needle Jet
  • Main Jet - size 155
  • Idle / Slow Running Jet - size 40
  • Drain Plug
  • Various small items

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of outstanding Japanese manufacture.

Rebuild kit for Keihin Carburetors on Kawasaki KLX650

16954
(7) Genuine Viton-Tipped Needle Valve Assembly with Clip for Dellorto VHST carburetors

(7) Genuine Viton-Tipped Needle Valve Assembly with Clip for Dellorto VHST carburetors

Newly arrived (7) Genuine Viton-Tipped Needle Valve Assembly with Clip for Dellorto VHST carburetors

Dellorto needle valve, seat and fiber washer for the Dellorto VHST carburetors.

Genuine Dellorto part, Viton-tipped!

Please note!
There are TWO versions of needle valves for the Dellorto VHST which are NOT interchangeable.
This version here is the version that DOES have the metal-wire clip at the top of the needle that latches onto the float arm.
The other version WITHOUT this clip van be found HERE.

Only genuine Dellorto needles are marked with the diamond shaped "Inc" logo!

Available in size:

  • 270
  • 300
  • 350

Required quantity per carburettor: 1

This is item number 7 in the drawing.

(7) Genuine Viton-Tipped Needle Valve Assembly with Clip for Dellorto VHST carburetors

CCR9950
Elaborate Rebuild Kit for Solex 32 PAIA carburetors

Elaborate Rebuild Kit for Solex 32 PAIA carburetors

Newly arrived Elaborate Rebuild Kit for Solex 32 PAIA carburetors

This is our most elaborate rebuild kit for the Solex 32PAIA carburetors.

It contains the following parts to service 1 carburettor:

  • Manifold gasket
  • Float chamber gasket
  • Airfilter gasket
  • Complete pump diaphragm + extra sheets
  • Nitrile pump housing gasket
  • Choke housing gasket
  • Needle Valve Size 175
  • 2 Throttle shaft seals
  • 4 Brass throttle shaft bushings
  • 2 Throttle valve discs - 32 mm - 8°
  • 4 Throttle valve screws
  • Various copper washers
  • Various fiber washers
  • Rubber O-ring

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Elaborate Rebuild Kit for Solex 32 PAIA carburetors

PMS101J
Rebuild Kit with Jets for Solex 32 PAIA 7-15 carburetors

Rebuild Kit with Jets for Solex 32 PAIA 7-15 carburetors

Newly arrived Rebuild Kit with Jets for Solex 32 PAIA 7-15 carburetors

Rebuild kit for the Solex 32PAIA 7-15 carburetors.

Contains the following parts from the regular service kit to service 1 carburettor:

  • Various gaskets
  • Pump diaphragm
  • Nitrile pump housing gasket
  • Needle Valve Size 150
  • Various copper washers
  • Various fiber washers

Additionally, this kit contains the following jets:

  • 1 x Idle Jet size 70
  • 1 x Idle Jet size 45
  • 1 x Main Jet size 120
  • 1 x Main Jet size 135

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit with Jets for Solex 32 PAIA 7-15 carburetors

PMS101
Service Kit for Solex 32 PAIA carburetors

Service Kit for Solex 32 PAIA carburetors

Newly arrived Service Kit for Solex 32 PAIA carburetors

Service kit for the Solex 32PAIA carburetors.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Pump diaphragm
  • Nitrile pump housing gasket
  • Needle Valve Size 150
  • Various copper washers
  • Various fiber washers

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAIA carburetors

FLEXIDRIVER
Flexi Driver tool to tighten Jubilee Clips

Flexi Driver tool to tighten Jubilee Clips

Newly arrived Flexi Driver tool to tighten Jubilee Clips

Special flexible tool to correctly tighten jubilee clips.

This Flexidriver is a highly effective, torque sensitive screwdriver, calibrated to bend when the proper torque is attained.

Apart from that, it's a handy tool with flexible shaft to tighten the clamps properly, also in hard-to-reach places.

Suitable for 7 mm connectors.

Flexi Driver tool to tighten Jubilee Clips

72116
(22) Choke / Venturi for Weber DCOE45 carburetors

(22) Choke / Venturi for Weber DCOE45 carburetors

Newly arrived Choke / Venturi for Weber DCOE45 carburetors

Venturi (or choke if you want) for the Weber DCOE45 series carburetors.

Dimensions:

  • 47.8 mm diameter at the widest part
  • 42.9 mm at the shoulder

Available in the following sizes:

  • 28 mm internal diameter
  • 30 mm internal diameter
  • 32 mm internal diameter
  • 34 mm internal diameter
  • 36 mm internal diameter
  • 38 mm internal diameter

Other sizes are available on special request.
Please contact us with your requirements.

Required quantity per carburettor: 2

This is number 22 in the drawing.

(22) Choke / Venturi for Weber DCOE45 carburetors

8639
(1) Throttle Slide for Dellorto PHM carburetors - early type

(1) Throttle Slide for Dellorto PHM carburetors - early type

Newly arrived (1) Throttle Slide for Dellorto PHM carburetors - early type

This is the early type throttle slide for the Dellorto PHM carburetors.

Original Dellorto.

Please note that there MANY different version of slides available for these carburetors and that choosing the correct one is of the utmost importance.

Please click HERE for a brief explanation of the slides.

Currently available from our stock in version:

  • 50/3

Also note that there is an Early version of this slide (this particular one) and a Late version.
The difference between the two is in the width of the Stop Screw Ramp.
This Early version has a width of 4.45 mm.
The late version, with a ramp width of 6.2 mm, can be found HERE.

Please contact us by email if you require this slide in different versions as not all versions are still available.

Required quantity per carburettor: 1

This is item number 1 in the drawing.

(1) Throttle Slide for Dellorto PHM carburetors - early type

11815
(1) Throttle Slide for Dellorto PHM carburetors - late type

(1) Throttle Slide for Dellorto PHM carburetors - late type

Newly arrived (1) Throttle Slide for Dellorto PHM carburetors - late type

Current-type slide for the Dellorto PHM carburetors.

Original Dellorto.

Please note that there MANY different version of slides available for these carburetors and that choosing the correct one is of the utmost importance.

Please click HERE for a brief explanation of the slides.

Currently available from our stock in version:

  • 50/3

Also note that there is a Late version of this slide (this particular one) and an Early version.
The difference between the two is in the width of the Stop Screw Ramp.
This early version has a width of 6.2 mm.
The late version, with a ramp width of 4.6 mm, can be found HERE.

Please contact us by email if you require this slide in different versions as not all versions are still available.

Required quantity per carburettor: 1

This is item number 1 in the drawing.

(1) Throttle Slide for Dellorto PHM carburetors - late type

CCRPDSIFLOAT
(36) Round Float for Solex Pierburg PDSI carburetors

(36) Round Float for Solex Pierburg PDSI carburetors

Newly arrived Round Float for Solex Pierburg PDSI carburetors

This is the black round float for Solex Pierburg PDSI carburetors.

Please note that there are 2 versions of floats for the PDSI and that this is the black round one as opposed to the white rectangular one which can be found HERE.

This version is supplied including the red copper bracket as shown in the photo.

Required quantity per carburettor:1

This is item number 36 on the drawing of the Solex PDSI.

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

(36) Round Float for Solex Pierburg PDSI carburetors

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Back in stock: Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

77008TC
Gunson Timing Light With Advance Feature

Gunson Timing Light With Advance Feature

Back in stock: Gunson Timing Light With Advance Feature

Gunson Timing Light With Advance Feature.

This timing light enables the synchronization of the ignition system with the piston movement.

An inductive pick-up replaces the necessity to disconnect the spark plug wire to operate the timing light.

Timing readout: 0-60° BTDC

Features:

  • Timing advance up to 60 crankshaft degrees
  • Superior performance at all speeds through 8000 rpm
  • Operates on all 12volt ignition systems
  • Xenon bulb providing Brilliant Blue/White light
  • 1,000,000 flash capacity
  • Automotive reverse polarity and overload protection
  • Inductive pick-up
  • Double check light indicates incorrect hook-up and faulty flash
  • Replaceable Xenon flash tube (Part No. 77009)
  • Full instructions included

Click HERE to download the instruction manual in English.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Timing Light With Advance Feature

KSBS3212
Original Float for Mikuni carburetors of the Yamaha XS 360

Original Float for Mikuni carburetors of the Yamaha XS 360

Newly arrived Original Float for Mikuni carburetors of the Yamaha XS 360

Original, brass, Mikuni float for the Mikuni carburetors as used on the Yamaha XS360.

Original Mikuni production and getting scarce!

Mikuni part number: 1L9-14940-00-00

This is item number 9 in the drawing.

Required quantity per carburettor: 1

 

Original Float for Mikuni carburetors of the Yamaha XS 360

PM8018.000
(5) Type A Needle Valve for Pierburg 2B Carburetors

(5) Type A Needle Valve for Pierburg 2B Carburetors

Newly arrived Type A Needle Valve for Pierburg 2B Carburetors

Type A Needle Valve for the Pierburg 2B carburetors.

Please note:
The Pierburg 2B carburetor series was supplied with a variety of Needle Valves throughout its lifespan and the various types of needle valves are NOT interchangeable!

In order to select the correct needle valve, you need to disassemble your carburettor to check which version you require.

This needle here is our Type A, as per the picture.
This needle valve has an internal spring (hidden from the eye) and a solid brass tip. It measures 20.75 mm in overall length.

This is number 5 in the drawing.

Required quantity per carburettor: 2

The Type B needle valve with exposed spring can be found HERE.

(5) Type A Needle Valve for Pierburg 2B Carburetors

PM8017
(5) Type B Needle Valve for Pierburg 2B Carburetors

(5) Type B Needle Valve for Pierburg 2B Carburetors

Newly arrived Type A Needle Valve for Pierburg 2B Carburetors

Type B Needle Valve for the Pierburg 2B carburetors.

Please note:
The Pierburg 2B carburetor series was supplied with a variety of Needle Valves throughout its lifespan and the various types of needle valves are NOT interchangeable!

In order to select the correct needle valve, you need to disassemble your carburettor to check which version you require.

This needle here is our Type B, as per the picture.
This needle valve has an exposed spring, a Viton tip and it measures 22.3 mm in overall length.

This is number 5 in the drawing.

Required quantity per carburettor: 2

The Type A needle valve with exposed spring can be found HERE.

(5) Type B Needle Valve for Pierburg 2B Carburetors

M4810A
Mangoletsi Design Weber DCOE - Dellorto DHLA - Manifold for BMW 2002 - 2000 - M10

Mangoletsi Design 40 Millimeter Weber DCOE / Dellorto DHLA / Solex ADDHE Manifold for BMW 2002 - 2000 - M10

Newly arrived Mangoletsi Design 40 Millimeter Weber DCOE / Dellorto DHLA / Solex ADDHE Manifold for BMW 2002 - 2000 - M10

Here we have a specially cast manifold to fit the 2 liter versions of the BMW M10 engine as used in the BMW 2002 and BMW 2000 Neue Klasse (New Class) cars.

Designed and produced by John Mangoletsi's company "Mangoletsi Design", it was produced to mate 2 Weber DCOE40, 2 Dellorto DHLA40 or 2 Solex ADDHE40 carburetors to the cilinderhead of the 2 liter M10.

It is drilled and tapped to accept a standard size BMW brake servo vacuum line union with thread 22 x 1.5 mm.

Comes complete the studs and Nyloc nuts as per the picture.

The casting is thick-walled and could be machined to accept 45 mm versions of the above carburetors.

Our Misab Plates and Cosworth Buffers are excellently suited join the carburettors to this manifold.
When desired, you can order these right along with the manifold by selecting them through the dropbox above.

Of course we can supply you with correct Weber DCOE, Dellorto DHLA or Solex ADDHE carburetors to fit this set. Please contact us to discuss your needs. Our contact page can be found HERE.

We can also supply you with fitting linkage kits which can be found HERE.

Mangoletsi Design Weber DCOE - Dellorto DHLA - Manifold for BMW 2002 - 2000 - M10

KSSD109

Replacement Throttle Slide Diaphragm for Mikuni BDS carburetors for Yamaha XV535 Virago

Newly arrived Replacement Throttle Slide Diaphragm for Mikuni BDS carburetors for Yamaha XV535 Virago

Replacement Throttle Slide Diaphragm for Mikuni BDS carburetors as used on, amongst others, the Yamaha XV535 Virago.

Normally this diaphragm is not available as a separate spare part but as the existing stocks of complete throttle slides are getting depleted, this is an excellent alternative to such a complete slide.

Please note that replacing this diaphragm does require a certain degree of handicraft.
Please read the instructions carefully before making your purchase.
The instructions can be found HERE.

This diaphragm is supplied complete with the glue and tie-strap that are required for the assembly.

This is a Carburetor City replacement diaphragm of excellent German manufacture.

Replacement Throttle Slide Diaphragm for Mikuni BDS carburetors for Yamaha XV535 Virago

52130.003
(76) Internal Plate for Weber DCOE carburetors

(76) Internal Plate for Weber DCOE carburetors

Newly arrived Internal Plate for Weber DCOE carburetors

Internal plate for the Weber DCOE and DCO/SP carburetors.

Required quantity per carburettor: 1

This is item number 76 in the drawing.

 

 

 

 

(76) Internal Plate for Weber DCOE carburetors