Motorcraft 1V carburetor parts

Motorcraft 1V carburetor parts.

The Motorcraft 1V carburetor was developed by Ford themselves and was produced in the hundreds of thousands.
In production from roughly 1978 to 1986, it was used on the various Ford models such as the Escort, Taunus, Cortina, Transit, Fiesta and Capri but also on the Saab 95 and 96 V4 and even the Ford Watermota marine engines.

It is a rather simple, single venturi carburettor, hence the name "1V" for "1 Venturi".
It is either equipped with a manual, cable-operated, choke mechanism or a somewhat more complicated "automatic" choke that use a bi-metal that responds to the temperature of the cooling liquid.

The carburetor is equipped with a standard pump, which uses a flexible diaphragm, to facilitate a smooth transition from idle to off-idle.

Except for the removable main jet, all other jets are calibrated brass bushings which are pressed into the cast housing and can not be replaced.

On this page you will find all currently available spare parts and service kits for these Motorcraft 1V carburetors.

To make you search for parts a little easier, you can open the exploded view drawing of the Motorcraft 1V HERE.
This drawing will open in a new window so that you can swap back and forth between the drawing and the parts on this page here.
The numbers in the drawing correspond with the numbers preceding the item descriptions on this page here.

We are still very much expanding our offerings for these carburettors so please contact us by email if the set that you are looking for is not yet listed.

Our Contact Page can be found HERE.

A more exact explanation of all systems employed in the 1V, including sections on fault diagnosis, please see that Haynes Manual on Carburettors which you can find HERE.