(26) Pump Diaphragm for Weber ADF Carburetors 47407.118

Weber
47407.118
9501892324980
    Availability: In stock and ready to ship !
Add to cart
  • Description
  • More

Diaphragm for the pump fo the Weber ADF series carburetors.

This particular diaphragm is equipped with a brass cam with spring-loaded brass tip.

The height op the cam including the tip is 12.5 mm, measured from the dish.

The diameter of the dish itself is some 25.3 mm.

Required quantity per carburettor: 1

This is number 26 in the drawing.

Weber Part Number: 47407.118

Operating principles of the acceleration pump and the role of the diaphragm in this:

This diaphragm is activated by a lever that is connected to the throttle lever(s).

When releasing the throttle, a spring returns the diaphragm to its initial position and by doing so, it sucks-in fuel from the float chamber.
A one-way valve prevents this fuel from leaking back into the valve chamber.

When you then activate throttle, that same lever pushes the diaphragm inwards and the pressure that is thus created makes the fuel being squirted downstream with the main airflow through the pump jet.

This extra flow of fuel will prevent "fuel starvation" from occurring when the throttle is suddenly opened which allows large quantities of air being sucked into the engine.

When you then release the throttle again, the diaphragm is again pushed back by the spring, thus priming the pump chamber with a fresh supply of fuel and making it ready to repeat the procedure.

This is an excellent system that has been employed for decades by various makes of carburetors and applied to all kinds of applications.
So, not only Weber but also Solex, Pierburg, Zenith and Mikuni used this system with more or less identical operating principles.

However, to ascertain a flawless operation of this system, the diaphragm need to be in excellent condition.

The original diaphragms are now coming of age and are suffering from the ravages of aggressive modern fuels which causes the "rubberized textile" material to harden or even crack, causing erratic running of the engine and fuel leaks.

Replacing the diaphragm is then the only sensible option which is a rather simple operation.

A complete overview of our pump diaphragms for Weber carburettors can be found HERE.

(26) Pump Diaphragm for Weber ADF Carburetors 47407.118

(26) Pump Diaphragm for Weber ADF Carburetors 47407.118

Diaphragm for the pump fo the Weber ADF series carburetors.

These diaphragms now tend to suffer from age and the ravages of aggressive modern fuels which causes the "rubberized textile" material to harden and even crack, causing erratic running of the engine and fuel leaks.

Replacing the diaphragm is then the only sensible option.

This particular diaphragm is equipped with a brass cam with spring-loaded brass tip.

The height op the cam including the tip is 12.5 mm, measured from the dish.

The diameter of the dish itself is some 25.3 mm.

Required quantity per carburettor: 1

This is number 26 in the drawing.

Article number: 47407.118

(26) Pump Diaphragm for Weber ADF Carburetors 47407.118

(26) Pump Diaphragm for Weber ADF Carburetors 47407.118

(26) Pump Diaphragm for Weber ADF Carburetors 47407.118

Related Products
!