22670.913
Varajet II to Weber 32-34 DMTL Carburetor Conversion Kit for Opel Ascona 1300.
When you are the happy owner of a 1981 - 1984 Front-Wheel-Drive (or FWD) 1300cc Opel Ascona with manual transmission that this equipped with a Varajet II carburetter, then you are probably also aware of the fact that those Varajet carburettors are coming to the end of their life and that the parts supply, apart from the gaskets and needle valves, is rather dramatic.
The consequence of this "wear & tear" is of course that the engine is running erratically and that the fuel consumption is increasing beyond acceptable levels.
Luckily, Weber has tackled this situation and crafted this conversion kit, using a brand new Weber 32-34 DMTL carburetor with manual choke (cable included).
As you can see in the photographs, this conversion kit consists of the carburettor, an adapter to fit the Weber to the original inlet manifold, an adapter to fit the original Varajet airfilter to the Weber and all other required parts to complete the conversion.
Please note that it is jetted for the 1300 cc version:
- Needle Valve: 175
- Pump Back Bleed Valve: 30
Primary choke:
- Throttle Valve: 32 mm
- Venturi: 24 mm
- Main Jet: 117
- Air Corrector: 200
- Emulsion Tube: F22
- Idle Jet: 55
- Pump jet: 45
Secundary choke:
- Throttle Valve: 34 mm
- Venturi: 25 mm
- Main Jet: 125
- Air Corrector: 165
- Emulsion Tube: F25
- Idle Jet: 50
- Pump jet: 45
The various jets to fine-tune this carburetor to your personal taste and the displacement / power output of your engine, can be found on the Weber DMTL page.
This is Weber Article Number: 22670.913
As mentioned above, this kit is for a car with a manual transmission.
if you car is an automatic, then please contact us as you will need a different kit.
Our Contact Page can be found HERE.
The carburetor is manufactured by Weber themselves in Spain while the remaining parts that compile this kit are produced in the UK.