15270.170 Ford Fiesta FoMoCo / Motorcraft 1V Weber 34 ICH Carburetor Conversion Kit
Fomoco / Motorcraft 1V to Weber 34 ICH carburetor conversion kit.
If you own a 1977 - 1983 Ford Fiesta 1100 with an aging FoMoCo / Motorcraft 1V carburetor, then you are probably very well aware of the fact that these carbs are slowly reaching the end of their working life and that refurbishing them is not really an option.
Fuel consumption will go up, power will go down and trying to set the idle speed will become a major challenge.
Luckily, you are not alone so the people at Weber set to work and have created this conversion kit.
With this set, the complete carburetor gets replaced with a brand new 34 mm Weber ICH carburetor with manual choke.
The kits comprises all required parts to complete this conversion:
- Weber 34 ICH carburetor suitable for the Fiesta 1100
- Choke cable, brackets and screws
- Base Isolator
- Fuel line, filter and clips
- Air filter adapter so you can re-use the original air filter housing
- Gaskets and various fitting materials
- Fitting instruction in English
This new Weber will fit onto 8 mm studs with a center-to-center distance of 64.5 mm.
If your inlet manifold complies with those dimensions, it will be a straight fit and does not require any adapters.
Please note that the carburetor is jetted specifically for the 1.117cc engine.
The various jets to fine-tune this carburetor to your personal taste and the displacement / power output of your engine, can be found on the Weber ICH page.
The carburetor is a genuine Weber, made in Spain in Weber's own factory while the conversion parts are produced in the UK.
This is Weber Part Number: 15270.170 / 15270170
Should you desire a different airfilter, you could try this one HERE.